Reaming & Calibration Tools, deburres for cooper and steel pipes, Chamfering Tool for plastic pipes. All professional tools to be used after cutting the pipe.

It’s very important to remove burrs and other unwanted edge caused by cutting.

For example if we have to press a multilayer pipe with a jaw, before doing this we have to calibrate and deburr the pipe to ensure tightness. 

Calibration tools with ratchet

 

For copper or steel pipes a deburring tools is indeed to remove harp edges and burrs which would damage the fittings seals.

Chamfering Tool are ideal for plastic pipes. Chamfer the outer edges of the pipe in order to prepare it for the soldering.

Deburrers, calibration tools and chamfering tools are plumbing tools that should not be missing in your toolbox!!!

Pipe Calibration Tools

Pipe Calibration Tools: REAMING AND CALIBRATION TOOL 2 in 1

Pipe Calibration Tools: Reaming and calibration tool
Pipe Calibration Tools: Reaming and calibration tool

 

Reaming and calibration tool 2 in 1: A complete tool to Prepare the Pipe for Installation. Indispensable for pressing multilayer pipes.

This calibration tool allows at the same time calibration and reaming of the internal border of pipe after the cut in order to make easy the insertion of pipe fitting avoiding injury to the o-ring of the fitting

(altro…)

0 commenti
Scopri di più sull'articolo Pipe Calibration Tools
calibratori multistrato MGF

Deburring Tools

Universal pipe deburrer

Universal deburring tools
Universal deburring tools

8-38 mm and 10-54mm

Pipe deburrer for stainless steel, copper, aluminium, plastic and multilayer pipes. Made making it corrosion resistant and equipped with hardened cutting edge.

It’s used to remove the burrs on the inside and the outside of a pipe.

(altro…)

0 commenti
Scopri di più sull'articolo Deburring Tools
Sbavatore UNIVERSALE per interni ed esterni

Rettifica per sedi rubinetti Millkit MGF: per ripristinare la tenuta

MILLKIT-rettifica-sedi-rubinettiLa rettifica per sedi rubinetti MILLKIT viene utilizzata efficacemente per ripristinare la sede dei rubinetti eliminando incrostazioni di calcare o ossidi e ricreando una sede piana idonea al funzionamento corretto della sede del rubinetto.

In questo modo si eliminano i gocciolamenti dai rubinetti senza sostituire i rubinetti stessi.

La fresa multilama è realizzata in acciaio speciale rettificato e temperata: rettifica tenuta rubinetti in modo perfetto e consente una lunga durata nel tempo.

(altro…)

0 commenti
Scopri di più sull'articolo Rettifica per sedi rubinetti Millkit MGF: per ripristinare la tenuta
Rettificatrice sede rubinetto con 5 frese